Chanter reed database
Pipemaker
Chanter pitch
D
C#
C
B
Bb
The measurements are in
mm
inches
Staple
1.
Staple blank for rolled staples
Please enter the measurements for the staple blank (mm)
Choose only one of the staple styles, "parallel(A)", "tapered(B)" , "combination(C)"
A
B
C
2.
Sheet thickness
Copper
Brass
3.
Brass tubing staple
If the staple is made from brass tubing please enter the measurements for length, outer diameter and inner diameter
Length
O.D
Wall thickness
Tapered tubing staple
If the staple is made from brass tubing but tapered please enter the measurements for length, inner diameters and wall thickness
Length
Large end I.D
Small end I.D
Wall thickness
4.
Mandrel
Please enter the measurements for the mandrel
Staple style, "parallel(A)", "tapered(B)" , "combination(C)"
A
B
C
5.
Staple "Eye"
Please enter the measurements for the staple eye (outer)
6.
Flattened portion of the staple
Please enter the length of the flattened portion of the staple
Reed head
7.
Slip
Please enter the measurements for the slip and the thickness of the slip after sanding
8.
"Sandingblock" diameter
Please enter the measurements for the sandingblock
9.
Head
Please enter the measurements for the reed head
Please enter the approx. thickness
10.
Reed
Please enter the measurements
A. Total length
B. Tip width
C. Width near bridle
11.
Shape of the reed head
Parallel
Tapered "boat" shape
Tapered from lips downwards
Additional
12.
Cane
French
| Spanish
| Californian
| Elder
13.
Bridle
Normal
| Looped
| Wire
| Distance from binding
14.
"Tonechamber" gouged
yes
no
15.
Tails gouged for staple
yes
no
Additional notes
Submited by
(your name)
Email