Uilleann Pipes Reed Making Guide

8. The Briddle.


Introduction | Tools and materials | Links

| 1. Preparing the Slip | 2. Gouging the Slip | 3. Gouging the Tone chamber | 4. The Head |
| 5. The Staple | 6. Tying the Head to the Staple | 7. The Scrape | 8. The Bridle |

Soundsample 'Crow' without bridle 94K | Soundsample 'Crow' with bridle 94K
Soundsample of the reed playing in a Charles Roberts chanter up to d''' 495K

For more info, problems, et. e-mail Evertjan 't Hart HartDD@wxs.nl

Copyright 1999 Evertjan 't Hart

Cut a strip of 1 mm thick copper (3mm x 50 mm) the make the looped bridle.


Introduction | Tools and materials | Links

| 1. Preparing the Slip | 2. Gouging the Slip | 3. Gouging the Tone chamber | 4. The Head |
| 5. The Staple | 6. Tying the Head to the Staple | 7. The Scrape | 8. The Bridle |

Soundsample 'Crow' without bridle 94K | Soundsample 'Crow' with bridle 94K
Soundsample of the reed playing in a Charles Roberts chanter up to d''' 495K

For more info, problems, et. e-mail Evertjan 't Hart HartDD@wxs.nl

Copyright 1999 Evertjan 't Hart